Hotbrick LB-2 User Manual download pdf (Page 2)

LB-2 / LB-2 VPN / VPN 800/2 Users Guide Property of HotBrick — 2005

Specific LB-2/LB2 VPN/ VPN 800 setups for most major ISPs

This guide was constructed to aid you through all types of configurations used by most major

ISPs, and set them up on your LB-2, LB-2 VPN, or VPN 800

Bell South

Connection Type: PPPoE

Bell South uses the PPPoE protocol which requires you to input a user name and password. If

you used any software to connect to the internet please uninstall it now as you will no longer need it.

Once you have done that, login to the LB2/LB2 VPN/VPN 800 WAN Router by going to

http://192.168.1.1

using your favorite web browser. Set the connection type to PPPoE and input your

user name and password into this PPPoE field, leave PPTP unchecked. Press the Submit button at

the bottom of the page and you are done. Also, set the Echo Retry to 90 seconds under Advanced

Port, Port Options menu.

Comcast

Connection Type: Dynamic IP

During the installation of your cable internet services, the installer should have paperwork with

your registration information, copy down MAC address or Adapter Address from that a piece of

paper. If you do not have this information, you can find out your MAC address by going to

Start>Run, type in CMD and press enter. In the Command Prompt enter ipconfig/all and write down

your MAC address. Once you have done that, login to the LB2/LB2 VPN/VPN 800 WAN Router by

going to http://192.168.1.1

using your favorite web browser. Set the Connection type as Dynamic IP

and scroll down to Optional. In the MAC address field , type in that MAC address separated by

hyphens. (Example: 0F-0F-0F-0F-0F-0F). Press the Submit button at the bottom of the page and

you are done.

Cox

Connection Type: Dynamic IP

During the installation of your cable internet services, the installer should have paperwork with

your registration information. The next step is to copy down the Domain Name from that piece of

paper. You may also call Cox to find out your Domain name. Once you have done that, login to the

LB2/LB2 VPN/VPN 800 WAN Router by going to http://192.168.1.1

using your favorite web browser.

Set your connection type as Dynamic IP and scroll down to Optional. In the Domain Name field enter

your Domain Name. Press the Submit button at the bottom of the page and you are done.

Earthlink

Connection Type: PPPOE

Earthlink uses the PPPoE protocol which requires you to input a user name and a password.

If you used any software to connect to the internet please uninstall it now as you will no longer need

it. Once you have done that, login to the LB2/LB2 VPN/VPN 800 WAN Router by going to

1 2 3

No comments

Hotbrick LB-2 User Manual Page 2